How To Baby Proof Toilet And Bathroom

How_To_Baby_Proof_Toilet_And_Bathroom

If you already started baby proofing your home you will probably find out that the bathroom is one of the most dangerous areas for your baby. Cluttered counters and slippery surfaces in the bathroom are serious potential hazards. However, you can fix this just like you would do in any other area of your house!

To make a baby proof bathroom, you will have to focus on certain areas. Also, there are some essentials that you have to follow if you want to successfully baby proof toilet with ease. The main idea is to eliminate slippery surfaces and sharp edges.

When to Start Baby Proofing a Bathroom?

As already mentioned, a bathroom can be a very dangerous place for your toddler. However, you can probably leave the bathroom in the last place when it comes to baby-proofing your house if you have a small baby. This is mainly because babies are not very mobile and won’t do things on their own in the bathroom. So, just keep it locked if you have no other solutions.

However, you should probably baby proof your whole house before you give birth to your little one for a couple of reasons.

You Will Be Busy

There are plenty of things that you will be doing with your newborn. The last thing you want on your mind is worrying about the things in your drawers and whether your cabinets are open. This is why you should start early with anything related to your baby – it helps to build good habits later in life.

Better Results

Starting early will allow you to perfect your system. Your home will be safer if you put more time into baby proofing. Also, you will be under a lot less stress if you do everything before your newborn arrives. This is why taking your time is essential when you start working on your baby proof bathroom. Make sure you don’t miss anything.

One thing you can do is to go inside your bathroom and just sit on the floor. This will help you to see things from a child’s perspective. Doing this a couple of times will help you to notice some potential hazards that you haven’t been aware of.

Learning is a Part of the Process

Ask any parent and almost all of them will tell you that young kids will try to get to places you would never expect them to go. Once you have a base defense you will start noticing small places where you can add a bit more safety measures. It is easier to do things like this and it adds on functionality to your baby proof toilet.

Making sure that your child is safe is very important, but it can be quite frustrating. However, doing things one by one will make the whole process easier and less scary for you.

Baby Proofing Your Toilet

We usually don’t think about our toilets as something important – we just use them and walk away. Moreover, we try not to think about them for numerous reasons. However, you will be forced to sit down and think thoroughly about different ways it could be potentially hazardous to your child. Only then will you be able to figure out how to make a baby proof toilet.

Parents often think that toilets are dangerous only because a baby could potentially drown in it. The truth is that only two inches of water are capable of drowning a small baby. Once you realize that toilets have heavy lids and usually a ceramic base you understand that it is a disaster just waiting to happen. Adding the streams of toilet paper on top of that is just making toilets seem more hazardous. However, there are a few things you can do to secure your toilet a bit more.

Lock the Door

Locking your door will completely restrict access to your baby. This is the easiest and the most convenient way of baby proofing your toilet (the same goes for the entire house). The only thing you should pay attention to is to put the lock high enough so that the baby can’t reach it. Usually, parents use one of these three types of locks.

Safety Chain

You can find a chain lock almost in all your local stores. They usually don’t cost too much, they are simple to use, and you can install them very quickly. All you have to do is to screw the chain to the frame of your door and the plate into the door itself. The main idea behind it is to use the knob on the chain and slide it into the plate to secure the door.

Barrel Bolt

This type of lock is sturdier than the previous one. Also, these locks usually leave a little room in the doorway and your baby’s fingers could maybe get caught in it.

Barrel bolt locks usually have three parts – a barrel and a tube-like piece of metal, and a chamber. For the lock to work, you have to slide the metal into a chamber. You have to lift the tube before sliding it out of place to open the door.

Hook and Eye

If you want a lock that you can open easily this is the type for you. You just have to put it high enough so your child can’t reach it since it would also probably be able to open it. All you have to do to lock the door is to put the hook in the eye. Not recommended if your child is a bit older since it will probably figure out how to use it.

Seat Lock

The one thing you don’t want to happen is to let your child splash your toilet water. A great opportunity for this would be if you leave the toilet bowl open. Another reason why you don’t want to leave your toilet bowl open is that your toilet bowl lid could potentially fall and hurt your baby’s head or fingers. Also, your child could lose its toys inside the bowl which will lead to a couple of hours of crying.

All you have to do is to secure your toilet seat with a lock. You can find different designs and styles available in your local hardware or baby store. Explore the options and you should have a baby proof toilet in no time.

Handle Lock

You can try locking your handle if you want to be sure your child is not able to flush anything down the toilet. Handle locks are usually very easy to find in your local store. Using them is also very straightforward – just attach the lock underneath the handle and it will do its job. A handle lock is a stopper and it prevents the handle from being pushed. Usually, these are designed with a special button that allows you to press the handle down when needed.

Baby Proofing Your Bathtub

Baby_Proofing_Your_Bathtub

A bathtub is probably the most dangerous part of the bathroom for your child. More than half of the drownings happen in the bathtub, which is why you have to pay special attention to them if you want a baby proof bathroom. Of course, you should always be there to supervise your baby when it is near the bathtub – this is also the only way that will 100% keep your baby away from the trouble.

However, there are also other solutions that you can implement to make the bathtub more secure for your little one.

Non-slip Mats

These are usually similar to play mats in terms of style and design. However, they are made to keep your child safe from slipping while it is taking a bath. Toddlers and babies usually tend to tumble over while they are bathing, even when sitting down.

Spout Covers

You probably noticed that your toddler’s height is usually the same as the water spout – providing a perfect situation for your child to hurt its head. This makes a potentially dangerous and painful hazard you want to avoid in your baby proof bathroom.

Parents usually love to put spout covers that have a childish look to make bathing even more fun for their kids. These covers are usually made of soft silicone or rubber and they go right over the spout.

Bathing Seat

Most parents use seats and special bathtubs for bathing their infants. You don’t have to ditch this safety method as your baby gets bigger. Keeping your baby contained will still be an option for you if you use a full-sized tub.

Using a bathing seat will allow your baby to sit up but still have enough room to move and play in the water. You can also try using inflatable safety tubs, you can find them easily and they share many characteristics with regular bathtubs.

The bathing seat that suits your child will differ as your child grows. Make sure you read the instruction manual you get when you buy a bathing seat to make sure that your child is still able to fit in it properly.

Baby Proofing the Cabinets

As you already know, children are very curious and will try to get into anything if they are able. This is why it is dangerous to keep your bathroom cabinets unlocked. Your child will be able to access your shampoos and soaps, long cord tools, poisonous cleaning materials, and medicines if your cabinets are not locked.  Securing your cabinets is crucial when planning a baby proof bathroom.

Remove Hazards

Your hazardous and poisonous materials should be in a higher cabinet once your baby starts using the bathroom. Don’t hesitate to move away even the items you usually consider harmless since your baby will get hurt.

Audit Items

Having cabinets without anything in them would be a total waste of space. So, you don’t want to leave your bathroom cabinets empty. You can use your cabinets for storing some harmless items such as clean sponges, towels, scales, and unopened packages of toilet paper.

Locks

As with anything else, it is always the easiest to secure an area with a lock. In this case, try searching for cabinet locks if you want to restrict your child access to it. You can find these in different designs and styles but people usually use some of these:

  • Cord locks
  • Sliding locks
  • Magnet locks

Bonus Tips

You have to pay attention to small details when you try to baby proof toilet, bathtub, and the rest of your bathroom. Here are some simple tips you should follow to get the best results:

  • Shower curtains are the best spot for mildew and mold to grow. This is why you should always try to look for a shower curtain that’s made of nylon or vinyl to keep your child healthy.
  • A toilet brush is probably the dirtiest item in your whole bathroom. You probably don’t even want to think about all the germs and bacteria that are on it. This is why you should always keep your toilet brush in a place your baby is not able to reach.
  • Shower rings and rods are something you should invest a lot in. Your little one will probably try to pull and tug your shower curtain as it gets older. Avoiding a nasty crash will only be achieved if you make sure that the rod and rings can hold the weight of your baby.

Baby Planet Overview

Baby proofing your bathroom is probably the last part of the house you want to pay attention to – only because your child won’t be using it on its own for the most part. However, you want to make sure you get done with it even before your baby is even born. Doing it later will be harder for you and you probably won’t do it properly.

Use baby proof items and pay attention to details. Don’t let your child in the bathroom without supervision until you are sure it won’t hurt itself.

Source

  1. Bathroom baby proofing checklist, babyproofingguide.com
Hello Mother's and Father's of the world. My name is Sarah Nielsen is this is my passion MyBabiesPlanet.com, as I am a mother of two beautiful babies and they are my world. Also I love blogging and sharing my experiences of what has worked for me when raising my kids. When I'm not juggling the madness at home, or working on my blog. You will find me product researching and keeping the site freshly updated with the latest baby gear and helpful articles for my readers!